ShopDreamUp AI ArtDreamUp
Deviation Actions
Description
Display
Cover Glass & Additional Display Details
Processor & Memory
Cellular Connectivity
Wireless Connectivity
Sensors
Rear Camera
Front Camera
Audio
Battery
Design
Accessories
Marketing
Annotations
- 5.2" Full-HD (1920x1080) AMOLED Display¹
- 2cd/m² Minimum Brightness (Night Usage)
- 400cd/m² Maximum Brightness (Sunlight)
Cover Glass & Additional Display Details
- Qualcomm EcoPix (FOSS, Variable Refresh & Assertive Display)²
- 2.5D Corning Gorilla Glass 4 with Oleophobic Nano-Coating
- 10 Point Touchscreen with working getPressure() Output³
Processor & Memory
- Qualcomm MSM8956 Snapdragon 650 (64bit Hexa-Core)
- 3GB Dual-Channel 933MHz LPDDR3 (Samsung ePoP)
- 16GB eMMC 5.1 Internal Storage (Samsung ePoP)⁴
- Micro-SDXC Card Slot for expandable Storage
Cellular Connectivity
- Qualcomm RF360 (WTR2965 + QFE2101 + QFE4320 + QFE2550)
- 4G LTE Bands: 2, 3, 4, 5, 7, 12, 17, 20 (FDD) + 38[41], 40 (TDD)
- Integrated Cat.7 LTE Modem (Limit to Cat.4 Speeds 150/50Mbps)
- VoLTE (with EVS) + Wi-Fi Calling (with Seamless Call Continuity)
- 2x Micro-SIM Card Slots for Dual-SIM Operation (Dual-Standby)
Wireless Connectivity
- Qualcomm WTR2965 Integrated GNSS (GPS, GLONASS, BeiDou & Galileo)
- Broadcom BCM20797 NFC Controller with Virtual Execution Environment
- Broadcom BCM43455 1x1 Dual-Band ac Wi-Fi, Bluetooth 4.2 & FM Radio⁵
- 940nm IR LED ("Universal Remote Control" Functionality via TMG4903)
Sensors
- ST Microelectronics LPS25HB Barometer (Pressure)
- ST Microelectronics LSM6DS3 6 Axis Motion Sensor
- ST Microelectronics LIS3MDL 3 Axis Magnetometer
- Ams TMG4903 RGBC Color & 3D Gestures Sensor
- Samsung 8mm or 10mm LRA (Haptic Feedback)
Rear Camera
- 13MP Sony IMX278 RGBW Image Sensor⁶
- f/2.2 Aperture, EIS 2.0 (via Gyroscope)
- ST VL53L0 2nd Generation Laser AF
- Ams AS3648 Dual-Tone LED Flash
- 4K2K UHD (2160p) HEVC Video
- Hardware Local Tone Mapping
Front Camera
- 5MP OmniVision OV5670 Image Sensor⁷
- f/2.2 Aperture, 88° Wide-Angle Lens
- 720p HD HEVC Video (2x2 Binning)
- Hardware Local Tone Mapping
Audio
- Integrated Qualcomm WCD9326 Hi-Fi Audio Codec (24bit & 192kHz)
- 2x Knowles SPH1668LM4H-1 Digital Multi-Mode Mems Microphones
- Front-Facing 0.7W Knowles Wildcat S9 IPx8 Speaker with N'Bass™
- FairChild FAB3103 Class-D Amplifier (~0.02% THD+N @ 0.7W)
- MaxxAudio Mobile 2.0 with MaxxVolume (Speaker Protection)
- Stereo Hi-Fi Audio Recording with Dual-Mic Noise Reduction
- Snapdragon Voice Activation (Multi-Mode Microphones)
Battery
- 3150mA/h embedded Samsung Lithium-Polymer Battery (~700Wh/l)
- FairChild FUSB301 USB 2.0 Type-C 1.1 Port (5V @1.5/2.0/2.1/3.0A)
- Broadcom BCM59354 5W Qi Wireless Charging Receiver (WPC 1.1)
Design
- Hybrid between the OP2's Design & the OPX's Design
- Anodized Aluminium Frame with Chamfered Edges
- Front FPC1145 Fingerprint Sensor Home Button⁸
- FairChild FAN5702 RGB Back- & Recents-Keys⁹
- Dimensions: ~142x72x8.2mm (=73% StB)
- 2.5D Curved Sandstone Back (Removable)
- IP65 Resistance (Rain & Accidental Spills)
- Bottom: USB Type-C & 3.5mm Headset
- Right: Volume-Rocker & Power-Button
- 2 Microphones (1x Top & 1x Bottom)
- 940nm IR Remote LED on the Top
- Weight: 130-140g (Super Light)
Accessories
- 30$ - Style-Swap Back Covers (Bamboo, Carbon Fiber & more)
- 15$ - Qi Wireless Charging Coil with integrade NFC Antenna
- Those who want NFC & Wireless Charging, can buy it
Marketing
- "Budget Phone Killer" (Meizu, Xiaomi & Lenovo)
- Global Availability (Price: 199$ , 219€ & 169£)
- 4G LTE should work in the US, Europe & Asia
Annotations
- It's the same (cheap) AMOLED Display, that was used in the Oppo R5 & Oppo R5s
- FOSS (Fidelity Optimized Signal Scaling) reduces AMOLED Power-Consumption (similar to LCD's CABC)
- Some Touchscreen Controllers (mainly Samsung) always report the value 0 or 1
- Samsung's ePoP combines both eMCP & PoP by placing both eMMC & RAM onto the AP
- BCM43455 Bluetooth 4.2 Certification: www.bluetooth.org/tpg/QLI_view…
- It's the same Camera Sensor & Optics, that were used in the Oppo R7 Plus
- It's the same (cheap) Camera Sensor & Optics, that were used in the Umi eMax Mini, ZTE V3 & ZTE V5
- Make it an actual (pressable) Button, so that Users can Touch & Hold (not Press & Hold!) to disable/enable the Back & Recents Buttons at Will (e.g. disable them when playing games)
- Having RGB Buttons, you can not only customize the button color, but also use them as Notification lights (& when Screen Off: Touch & Hold Home-Button to show Ambient Display Notifications)
- If you like my Concept (& I sure hope you do), then by all means: Go ahead & Do it! (It would be nice, if you would send me 1 Retail Unit & perhaps 0.50$ per Device sold, because I did spend quite a lot of Time on this!)
Image size
1920x1080px 5.95 MB
© 2016 - 2024 r4yNTv
Comments0
Join the community to add your comment. Already a deviant? Log In